Latest monitoring system spares Tenders | Government monitoring system spares Tenders

Central Government/Public Sector

CTN :45550931

19 Jun, 2026 NA

Budgam - Jammu And Kashmir

Tender For supply of class b & c surge protection device (spd) -type i & ii with visual indication and potential free contact to remote monitoring as mentiontioned in specification no. rdso/spn/165/2023 dated 20.06.24 and as per rdso guidelines on earthing , bonding lightening and surge protection system for s&t installations issued vide lettter no.rdso-sig0spd(proj)/01/2020 dated 01.05.2025. [ warranty period: 12 monthsafter the date of delivery ] ]

Central Government/Public Sector

CTN :45549791

02 Jul, 2026 NA

Jammu - Jammu And Kashmir

Tender For cting for and on behalf of the president of india invites e-tenders against tender no433_tele_jat_1_26-27 closing date/time 02/07/2026 15:00 hrs. bidders will be able to submit their original/revisedbids upto closing date and time only. manual o ers are not allowed against this tender, and any such manual o erreceived shall be ignored.1. nit headername of workupgradation and provision of rdso-based vss (video surveillance system) atsvdk station under jammu division.bidding typenormal tendertender typeopenbidding systemsingle packet systemtender closing datetime02/07/2026 15:00date time of uploadingtender10/06/2026 13:01pre-bid conferencerequirednopre-bid conference datetimenot applicableadvertised value 19146536.39tendering section tele jatbidding style single rate for tender bidding unitabove/below/parearnest money (rs.) 382900.00validity of offer ( days) 60tender doc. cost (rs.)0.00period of completion 4 monthscontract type works - general contract category expenditurebidding start date 18/06/2026are jv allowed to bid nonumber of jv memberallowed0are consortium allowedto bidnonumber of consortiummember allowed0ranking order for bidslowest to highest expenditure typecapital (works)2. schedules.no. itemcodeitem qtyqty unitunit ratebasic value escl.(%) amount biddingunitschedule () a-supply & installation19146536.390101 100.00numbers19900.031990003.00 at par1990003.00description:- supply, installation, testing and commissioning of full hd fixed dome type ip colourcamera along with 128 gb or higher sd card, housing & mount and all accessories required forinstallation purposes as per rdso spec no rdso/spn/tc/65/2021,rev 6.0 or latest. inspection rdso020222.00numbers66809.431469807.46 at par1469807.46description:- supply, installation, testing &commissioning of full hd p/t/z (pan/tilt/zoom) ipcolour camera as per rdso spec. no: rdso/spn/tc/65/2021 ver.6.0 or latest. inspection : rdso030314.00numbers27989.33 391850.62 at par 391850.62description:- supply, installation, testing & comissioning of 4k uhd bullet type ip colour cameraas per rdso spec. no: rdso/spn/tc/65/2021 version 6 (or latest). all the accessories and xingmaterials including mount required for this installation are to be supplied by contractor within thesame cost.material inspection by rdso.04041.00 per unit143780.82 143780.82 at par 143780.82description:- supply, installation, testing and commissioning of face recognition system (frs)software complete with all accessories, on license per camera basis for all cameras in item no 03schedule -a- quantity - 14 cameras ) , enabling face recognition across multiple locations (such asstations, rpf thana and security control room) under the same license, as per clause no. 19.0 ofrdso specification no. rdso/spn/tc/65/2021 rev. 6.0 or latest. inspection by rdso.05051.00numbers597893.20 597893.20 at par 597893.20description:- supply installation, testing and commissioning of server hardware for facerecognition complete with all accessories as per clause no. 10.1.1.3 spec nordso/spn/tc/65/2021, rev 6.0 or latest. inspection rdso06062.00numbers1031002.212062004.42 at par2062004.42description:- supply, installation, testing, wiring & commissioning of external storage for 90 daysrecording with (hardware and software) with minimum 240tb storage capacity with all accessoriesas per clause 12.0 as per rdso speci cation no rdso/spn/tc/65/2021 version 6.0or latest.inspection: rdso for supply portion"page 1 of 12run date/time: 10/06/2026 13:01:55jammu division-s and t/northern rlytender documenttender no: 433_tele_jat_1_26-27closing date/time: 02/07/2026 15:0007072.00numbers209465.99 418931.98 at par 418931.98description:- "supply, installation, testing & commissioning of pc workstation for viewingcameras in multiscreen mode, monitoring and system management and 4k uhd led monitor of 24inch size including all required licensed software's (like os, ms o ce, anti-virus with 03 yearssubscription), multifunction device

Central Government/Public Sector

CTN :45546481

22 Jun, 2026 NA

Multi City - Multi State

Tender For supply and installation of class b and c surge protection device [spd] - type i and ii with visual indication and potential free contact to remote monitoring as per specification no. rdso/spn/165/2012ver 3.0 or latest and iec standard 61643 for single line 230v ac application with handling lightning surgesof 10/350 microseconds and switching surges of 8/20 microseconds .one set consists of 3 nos. of spd [2 no. of b class [l-n, n-e] and one no. of c class [l-n] all enclosed in a box with kema or vde certified as per latest iec 61643-11-2011 standard. class b and c surge protection device required with three modules only.[ warranty period: 30 months after the date of delivery ] ]

Central Government And Public Sector

CTN :45546392

18 Jun, 2026 NA

Lumding - Assam

Tender For supply of lobby registers with hardcover at crew lobby/lmg, bpb, kyq, ghy & ngc 1. caution order acknowledgement register. 2. sign on register (cms link failed) 3. sign off register (cms link failed) 4. cms link failure register 5. combine sign-off register 6. fog safe device & wt issue and deposit register 7. ctr issued/deposited register 8. grievance register of ur/sc/st/obc 9. breath analyzer test register by supervisor 10. habituated alcoholics register 11. lr monitoring register [ warranty period: 30 months after the date of delivery ] ]

CTN :45544337

26 Jun, 2026 NA

Nashik - Maharashtra

Tender For supply of wound up to 7dot6 cm with odour barrier film excess cap synthetic skin barrier , ostomy colostomy bags with microporous adhesive tape stominal one piece system , ostomy ileostomy bag with skin barrier stominal one piece system , pad abdominal swab 25 x 25 cm with tape 30 cm , pad abdominal swab 40 x 25 cm with tape 30 cm , slab plaster of paris 10 x 38 cm tin of 50 , slab plaster of paris 75 x 15 cm tin of 50 , suspensory scrotal , surgeons caps disposable , surgeons mask disposable , 3 piece bilayer polypropylene hernia system onlay to connector to underlay size extended , 3 piece bilayer polypropylene hernia system onlay to connector to underlay size large , haemostatic clips titanium extra large , haemostatic clips titanium large , haemostatic clips titanium medium , mesh prosthesis for herniatosmall polypropylene mesh6x11cmscomposite lightwtmesh of polypropylene polygalactin 910 polygycolic acid , polyamide monofilament size 2to0 70to80 cm 3by8 circle reverse cutting 40to45 mm , polydioxanone size1 150cms loop 1by2 circle rb needle 50to55 mm , polypropylene blue monofilament 70to75 cm size 2to 03by8 circle , polypropylene meshprosthesis for herniatomedium polypropylene15x15cm ofpolypr polygalac 910 polygycolic acid , polypropylene mesh 6 cm x 11 cm box of 6 , synthetic absorbable polygalactin 910polyglycolic acid coated with polycaprolate size 2to0 70to90 cm 1by2 circle rb 30to40 mm , synthetic absorbable polygalactin 910 polyglycolic acid coated with polycaprolate size 3to0 70to90 cm 1by2 circle rb 20to25 mm , laparoscopic mesh fixation device absorbable tacker 5 mm shaft with 20to30 tacks , tube feeding smooth plastic infant 38 cm long 8f with red flexible connector for nasogastric feeding , tube feeding smooth plastic infant 38 cm long 5f with red flexible connector for nasogastric feeding , naso gastric tube adult 100 cm long 14g ryles tube , naso gastric tube adult 100 cm long 16g ryles tube , naso gastric tube adult 100 cm long 18g ryles tube , naso gastric tube adult 100 cm long 20g ryles tube , nitrile non sterile gloves small s , nitrile non sterile gloves medium m , nitrile non sterile gloves large l , closed wound suction sizeto16fr , sterile adhesive post op dressing large , sterile post op dressing pack large , thoracic drainage catheter size 14f , thoracic drainage catheter size 18f , thoracic drainage catheter size 20f , thoracic drainage catheter size 24f , thoracic catheter size drainage with trocar 24 , thoracic catheter size drainage with trocar 28 , thoracic catheter size drainage with trocar 32 , thoracic catheter size drainage with trocar 36 , foley balloon three way 24 fr , foley balloon three way 26 fr , oxygen catheter sterile nasal plastic disposable set of 2 , suprapubic set complete , lung volume exerciser , pressure monitoring line 100cmor200cm maleorfemale , tms draw sheet 1 mtr x 96cms gamma sterile , suction cannula 10 fr length 18 cm , suction cannula 8 fr length 18 cm , patient positioning belt , silver dressing for burns 10 x 10 cm , ankle wrap l , ankle wrap xl , baseball finger splint , flex finger splint , foot drop splint , frog finger splint , rib belt female , rib belt male , wrist hand resting splint finger , disposable cautery patient plate with cable , disposable nebulizer mouth piece mask channel tube and cupdot , rigid strapping tapes , malleable splints upper limb disposable , malleable splints lower limb disposable , antistatic operation theatre slipper made of ethylene vinyl acetate washable waterproof fully covered on topsdot size 8 or 9 , disposable laparascopeic compatible with harmonic gen 11 //bid details 2 / 85 36 cm lenght 5 mm dismeter articulatingjaws vessel seling cutting probe steril pack , laproscopic anti tofor camera cleaner sterile 5 to 10 ml bott , disposable laproscopic silicone latex washer for 5 mm port ssterile , disposable laparascopic silicone latex washers for 10 mm port sterile , disposable laparascopic port 5 mm length 20to30 cm sterile , d

CTN :45303262

19 Jun, 2026 NA

Delhi - Delhi

Tender For corrigendum : providing of design installation and maintenance of educational lab/centre - smart class lab; site preparation, supply and installation of hardware, teacher training, maintenance of hardware (amc/cmc); buyer - interactive flat panel display , ups , camera with microphone , end point protection (anti-virus) for ops , device management software for both ifp & ops , central project monitoring dashboard , wall mounted cabinet for safety protection

CTN :45492853

19 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of switching impulse board , racks power supply board inco spares , servovalve amplifier , diving servocontrol , cpu board set , cpu board set front and rear servo , i o bus interface board , logic 2 3 board , analog input board current , voltage analogic inputs , 4 x channel rs485 module , logic output module , vme io interface board , serial link mother board , module c633 a ssu , logic input module , current analogic , voltage analogic , ventilation fan rack 19 , cpu board set for normal monitoring , esd kit electrostatic sensitive device kit , interface test equipment including laptop software , current test adapter for echosounder , drs1 simulator tool cs 55 , tool set of adaptor seb5900 , 1 wk12 dummy load tool cs 118 , dummy load for sonar beacon

CTN :45471669

20 Jun, 2026 NA

Jorhat - Assam

Tender For supply of resistance monitoring device (q4)

CTN :45476070

15 Jun, 2026 2.37 Crore

Saharanpur - Uttar Pradesh

Tender For audyanik proyog avam prashikshan kendra saharanpur mein nirmaanadhin shahad utkrishthta kendra se sambandhit machinery or parts ki apoorti or establishment ka karya - supply & installation of automatic honey bottling filling machine with sensor based calibrator including with filling range (50 grams to 1000 grams), outout/min (any size within range 3000 to 5000 bpd), filling system (pneumatic vmp system synchronize with servo motor), direction of movement (left to right), number of head/syringe (single), drop controller (y- pneumatic stopper), calibration of machine (automatic with sensor), inlet material stopper (fg valve), feed tank (direct connected), feed tank overflow controller (float type), material feed in m-tank (automatic), heating arrangement in m-tank (water bath system), material shaker in m-tank (electrical shaker), bath temperature & material temperture monitoring system (full auto-control with ccp), electric spply (230 cm v/50hz), tempreture controller (pid), machine dimensions (250 cm x 100 cm x 210 cm (approx) and net weight (300 kg). etc all complete with isi marked., supply & installation of automatic linear capping machine including with output/hour (any size with range 4000 bpd), direction of movement (left to right ), machine dimensions (180 cm l x 90 cm w x 170 cm h (approx)), sensor (panasonic), pneumatic accessories (spac) and no bottle- no cap (yes). etc all complete with isi marked., supply & installation of automatic round bottle sticker labelling machine including with output/hour (10000 bpd), direction of movement (left to right), controlling (micro controller base mm interface), conveyor motor (0.25 hp/415 v/ 50 hz), pressing device motor (60 watt / 220 v/ 50 hz), servo motor (750 watt), label accuracy (+/-1mm), gap sensor (u-type), bottle spacer (electronic), variable speed (40 bpm-max), hmi & plc (7 inch coloured touch pad type), pneumatic (spac), pressure roller (sillicon), adjustment (lead screw), label size (up to 100 mm width), bottle dia (up to 120 mm dia), batch counter (yes) and online data indication (yes) etc. all complete with isi marked., supply & installation of air compressor including with type (reciprocating), tank volume (250 ltr), pressure range (10 kg/ cm 2), no of head-(02 nos.), type (industrial) and operation (continue) etc. all complete with isi marked., supply & installation of induction sealing including with automatic induction sealing machine etc. all complete with isi marked., supply & installation of turn table including with 750 mm dia turn table moc ss304, motor - 0.5 hp/440 vac, vfd - invt/delta and model -cgmp etc. all complete with isi marked., supply & installation of packing conveyor including with 10 feet long packing coveyor, width of conveyor 300 mm, motor - 0.5 hp/440 vac and model - cgmp etc. all complete with isi marked., supply & installation of auto honey feed pump including with automatic honey feed system for filling machine from plant etc. all complete with isi marked., supply & installation of bottle washing machine including with automatic bottle cleaning machine tilting action type etc. all complete with isi marked., supply & installation of particle inspection table including with online particle checker etc. all complete with isi marked., supply & installation of online printer including with online ink jet printer etc. all complete with isi marked., supply & installation of slate chain conveyor including with ss304 slate chain conveyor, motor - 0.5 hpx 3 nos, vfd - 3 nos and guider - as per design etc. all complete with isi marked., supply & installation of automatic wax sheet foundation mill including with sheet making roller set (cell size 5.4 mm, length ,600 mm, dia 200 mm), cold water circulation system 0.5 hp, conveyor belt length - 300 mm, sheet cutting system, water cooling system 1.5 - ton cap, wax malting tank, wax filtration system, ss tray, ss bucket, operation by hmi, dat

CTN :45465678

19 Jun, 2026 NA

Kanchipuram - Tamil Nadu

Tender For supply, installation and testing of electronic equipments - supply -ece lab equipments, single output regulated dcvariable power supply- input voltage: 230v / 50hz ac. output voltage: (0 30)v dc. output current: (0 2)a dc. protection circuit: over voltage, over current, and short-circuit protection. high efficiency: greater than 85%. low ripple and noise: less than 50 mv. digital display., dual output regulated dc variable power supply- input voltage: 230v/50 hz ac. output voltage: (0 30)v dc. output current: (0 2)a dc. protection circuit: over voltage, over current, and short-circuit protection. high efficiency: greater than 85%. low ripple and noise: less than 50 mv. digital display., function generator - frequency range: 0.1 hz to 5 mhz. display: 4 to 6 digit led display. output waveforms: sine, triangle, square, pulse, ramp. amplitude: 0 20 vpp. rise time: 100 ns. distortion: 1% within specified frequency range. power supply: 230 v ac 10%, 50 60 hz. output amplifier protection: short-circuit and 15 v, digital ic trainer kit with breadboard - +5 v dc, 1 a regulated power supply. 12 v dc / 15 v dc, 200 ma regulated power supply. solderless breadboard with minimum 840 tie- points,power distribution buses. zif (zero insertion force) ic sockets to accommodate 8 or 16 pin ics. logic input and output leds for output monitoring. 16 buffered led outputs. 16 debounced switch inputs. variable clock generator: 0.5 hz to 50 hz. single pulse output: 100 ms (buffered, positive and negative outputs). one seven-segment display with 4 bcd inputs. built-in logic switches. manual clock: debounced push-button (one pulseper press)., dc voltmeter(digital) - dc digital voltmeter - 3 digit led/lcd display, measurement range: 0 20 v dc,accuracy: class 0.5( 0.5 % full-scale), dc ammeter - dc ammeter digital - 3 digit led/lcd display, measurement range: 0 5 a dc,accuracy: class 0.5 ( 0.5 % full-scale), lvdttrainer kit - ac mains power supply: 230 v 10%, 50 hz. fixed regulated dc power supply: +5 v, 12 v / 500 ma. transducer: lvdt. lvdt displacement: 20 mm (40 mm total). displacement scale: linear 20 mm. displacement display: red color 3 digit led display. excitation frequency: 4 khz. excitation voltage: ac variable excitation voltage up to 5 v., strain gauge trainer kit - ac mains power supply: 230 v 10%, 50 hz metal foil strain gauge mounted on beam/cantilever. strain measurement under applied load. wheatstone bridge arrangement. instrumentation amplifiers with 3 digit display for strain / output voltage. table-top trainer with labelled panel. test points for signal measurement. built-in dc power supplies and wooden closed cabinet. supplied with patch cords and user manual., ask modulation and demodulation kit - message signal1:8-bit variable data,amplitude 5v. message signal 2:debounced data, amplitude low (0) and high (5 v). message signal 3:fixed data 25 khz, 12.5 khz, 6.25 khz, 3.12 khz,amplitude 5 v. carrier signal: sine wave, frequency 200 khz, amplitude 5 v. supply voltage (board): +12 v, +5 v dc. input voltage: 230 v ac, 50 hz. interface connectors: 2 mm banana socket., fpga trainer kit - must use industry-standard mid-range fpga device usb-jtag programmable, compatible with vivado ise (webpack). power supply: 5 v dc through usb or external adapter. on-board peripherals: leds, switches, push buttons, 7-segment display,clock source, gpio / pmod expansion ports, uart, vga / hdmi, usb- uart bridge, usb cable. user manual., measurement scale: a vertical steel meter scale, usually with (1mm) graduations, for precise deflection measurement., accessories: includes a set of slotted weights (e.g., (6times 50g) or similar sets) for incremental loading.

Monitoring System Spares Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector